Liquid crystal splicing screen hydraulic front maintenance bracket

1 min read

The hydraulic front maintenance bracket is a bracket used to install the large screen of LCD splicing screen, and it is a bracket for LCD splicing TV wall, which can be horizontally telescopic for maintenance after horizontal expansion and contraction.
The hydraulic front maintenance bracket is made of steel pipe and high-hardness metal cold-rolled plate, and the surface is sprayed with black sand. Telescopic main components are hydraulic chain moving rod and precision bearing, which supports full front-end maintenance and disassembly and has the functions of up and down, left and right, front and back adjustment. The net thickness of the whole bracket is 120mm, and the overall thickness of the bracket is 310mm, which does not occupy the back space, and can be flexibly combined and infinitely spliced. Each front maintenance bracket can be ejected and pushed independently without affecting the normal use of other display screens, which is the first choice for the computer room command center industry.
Advantages of hydraulic front maintenance support:

In most LCD splicing large screen projects, the main installation methods are wall-mounted bracket installation and floor-mounted bracket installation. Each installation method has its own characteristics, such as: the installation method of wall-mounted bracket is not convenient for wiring maintenance; Floor stand takes up a lot of space and so on. In order to realize convenient installation, convenient wiring, convenient maintenance and no space occupation, the hydraulic front maintenance bracket and its telescopic wall-mounted installation mode can be selected.

1. The installation method of the invention is not only suitable for the situation with few screens, but also can be used in the situation with many screens, thus saving space.

2. Installation method of the maintenance bracket before hydraulic pressure: by gently pressing the screen surface or frame, you can slowly pop up any screen at a uniform speed, and then pull the LCD splicing screen out horizontally by more than 20 cm like a drawer, so that the back of the screen is completely exposed, which is much more convenient at will.

3. The thickness of the maintenance bracket before hydraulic pressure is 125mm (before assembling the splicing screen), and the maintainable travel space after horizontal telescopic pull-out is 320mm, that is, 320mm (32cm) behind the telescopic screen. With such a large space, it is no longer necessary to disassemble the screen when repairing the wiring.

lcd splicing screen,led screen,advertising screen

Rui Guan