Rui Guan

In recent years, lcd advertising machine can be seen everywhere in life, with small shops and large office buildings. Nowadays, advertising machines have become indispensable scientific and technological equipment around us, especially electronic equipment. Therefore, high-quality lcd advertising machine occasionally has problems, and it is also very troublesome to find a manufacturer to deal with problems. The following small series teaches you how to correctly use four methods to prevent lcd advertising machine from being damaged.

1. Don't share power.

If it is an electronic device, turn on the power. If the voltage of electronic equipment is unstable and exceeds the rated voltage, it is easy to break down. The same is true of lcd advertising machine. Therefore, don't put lcd advertising machine and high-power household appliances together to share power.

2. Place it in an appropriate environment.

Lcd advertising machine is divided into outdoor and indoor. Outdoor advertising machines are generally waterproof, moisture-proof, high temperature and other characteristics, which are easy to adapt to harsh outdoor environment. However, indoor advertising machines do not have these functions. It is best to leave more than 10 cm of heat dissipation space around lcd advertising machine, and do not put it in a poorly ventilated place. Otherwise, the equipment will be covered, the vent of the equipment will be blocked, the temperature of the chassis will be too high when the equipment is running, and the advertising opportunity will be damaged.

3. Maintain the advertising machine regularly.

It is inevitable to clean up the advertising machine regularly. The indoor environment and air of indoor advertising machine are very good, but the machine is bound to have dust and oil pollution, so it should be cleaned and maintained regularly. In addition, before cleaning the machine, the machine must be turned off and unplugged. When cleaning the dirt on the surface of the advertising machine, please wipe it with a soft cloth and a small amount of water. Don't use too much wet cloth to prevent water from entering the screen. At the same time, avoid using corrosive detergents and chemical reagents to prevent the paint and coating on the surface from being corroded.

Don't unplug the power, turn off the advertising machine.

Lcd advertising machine's power supply must be turned off according to the instruction sequence, and frequent plugs cannot turn off lcd advertising machine. After the advertising machine runs, the chip and hard disk will turn off the power immediately after reading the information, which is easy to damage the hardware. However, in the case of uncontrollable power failure, the advertising machine is turned off, and it will take about 5 to 10 minutes to start the equipment.