Hydraulic front maintenance bracket is a kind of mounting bracket for LCD splicing screen, which can extend horizontally forward when installed and retract after installation, commonly known as retractable hydraulic front maintenance bracket. And it is usually divided into two types: hydraulic front maintenance support and electro-hydraulic front maintenance support.
The installation environment of LCD splicing screen is varied, and each site will encounter different situations. From the perspective of maintenance methods, it can be divided into two situations: one is that Party A is willing to reserve space for the LCD splicing screen that needs maintenance from the back, and people can work from the back. This method is called the post-maintenance and installation method of LCD splicing screen; One is that if the space of the site does not allow, if it is necessary to fix the bracket directly on the wall, or if the bracket rises from the ground to make the thickness of the bracket as narrow as possible to compress the whole space, then it can only be maintained from the front. This method is called pre-maintenance installation.
Hydraulic front maintenance bracket mounting box
The front maintenance installation method mentioned in the maintenance method view does not necessarily refer to the use of hydraulic front maintenance support. Front maintenance literally means maintaining the splicing screen from the front. That is to say, if you use an ordinary wall-mounted bracket, similar to the simple wall-mounted bracket used in our ordinary living room, you need to disassemble the LCD splicing screen for maintenance. After repair, you must reinstall. A single LCD splicing screen is also possible. If it is similar to LCD splicing TV wall, such as 48 splicing mode, there is something wrong with the middle screen. At this time, it is not a question of disassembling a screen. You must remove all LCD splicing units above the fault screen before maintenance can be carried out. This installation method has high maintenance cost.
It is precisely because of the above situation that the hydraulic front maintenance support is derived. The hydraulic front maintenance bracket can be used for screen installation and subsequent maintenance. The hydraulic front maintenance bracket can be ejected and recovered from the front and connected by hydraulic device, which shows the important position of the hydraulic front maintenance bracket in the installation of LCD splicing screen.
In the design principles of products, there are many important factors in choosing or buying the bracket. For example, the pre-hydraulic maintenance bracket must include six-direction fine-tuning devices in the whole design structure, and the structure adopts standard frame design and incorporates physical principles, which fully ensures the fixing and safety performance of LCD splicing screens and reduces the splicing gap.
Mounting element of hydraulic front maintenance bracket
At the same time, Xiaobian tells you here: We mentioned two kinds of hydraulic front maintenance brackets above, and it is generally not recommended to use electric front maintenance brackets. Due to the instability of the electric bracket, the ejection speed of the bracket can not be controlled, which leads to the instability after installation and affects the normal use. At the same time, it is impossible to control the splicing gap between screens in the electric mode, so it is not recommended to use the electro-hydraulic front maintenance bracket. At ordinary times, the hydraulic front maintenance supports we mentioned are all manual hydraulic front maintenance supports. If the above content is not clear, you can directly consult the customer service of the website or directly contact the phone in the upper right corner.
lcd splicing screen,advertising screen,display screen
