Maintenance of LCD splicing screen

1 min read

There are two kinds of stains on LCD splicing screen, one is that dust in the air sticks with the passage of time, and the other is fingerprints and oil stains inadvertently left by users.
There are two situations for LCD screen installation. One is that the manufacturer adds a protective layer on the outside of the LCD screen, such as transparent hard plastic, so that our fingers and dust will not actually touch the LCD screen itself, as long as we pay attention to its surface hygiene; The second and most common one is that the LCD screen is directly exposed, and any external substance can easily come into direct contact with the LCD screen. At this time, we must be more careful when cleaning and maintaining the LCD screen.

The first thing to note is that the surface of the LCD screen looks like a solid black screen. In fact, the manufacturer will add a special coating to this screen. Therefore, when cleaning, you must not wipe the screen surface with any alkaline solution or chemical solution at will, otherwise the coating may be dissolved and the display effect will become worse.

The following are some misunderstandings about LCD splicing screen maintenance:

Myth 1: Wipe the LCD screen with a soft cloth, glasses cloth or paper towel. Never wipe the LCD screen with glasses cloth and paper towel. It is easy to scratch the delicate LCD screen. For dust, we can blow it off first, and the remaining dust particles can be gently wiped on the LCD panel with a special LCD wiping cloth. Generally speaking, fingerprints and oil stains are not as easy to remove as the former, but it is also easy to solve if a special liquid crystal wiping cloth is used, because the special liquid crystal wiping cloth is made of special fibers, which has a much better wiping effect than ordinary high-grade eye mask cloth, is soft, does not scratch the screen, and has the function of dissipating static electricity and preventing dust from further adsorption.

Myth 2: Clean the LCD screen with clean water. Liquid is easy to penetrate into LCD screen or digital camera, which can easily cause short circuit of equipment and burn out expensive digital camera. What's more, there is nothing that Qingshui can do about fingerprints and oil stains. More often, the more you rub, the more you spend.

Myth 3: Cleaning the LCD screen with chemical solvents such as alcohol Generally speaking, alcohol is a commonly used organic solvent, which can dissolve some dirt that is not easy to erase. If it is used occasionally to clean the shell of a digital camera, it may not have any adverse effects. But don't use alcohol to clean the LCD screen. Once the display screen is wiped with alcohol, this special coating will dissolve, which will adversely affect the display effect.

lcd screen,splicing screen,advertising screen

Rui Guan