6" Molded Bed Wheel Assembly for Stryker 5000-002-010 / 5000002010 & 3006-200-142
Direct replacement 6" (5.75" OD) molded bed wheel assembly for Stryker 5000-002-010, 5000002010, and 3006-200-142. Non-marking PU tread fits Secure II and S3 beds.
When hospital bed wheels wear out or start slipping during braking, they need to be replaced in time to keep patient transport safe and smooth. This 6" Molded Stryker Bed Wheel Assembly is a direct replacement part for Stryker hospital beds and stretcher chair. It matches the original size and load capacity, so you can install it directly without any modifications.

Part Numbers and Color Difference
In different Stryker service manuals and hospital purchasing systems, you may see two main part numbers for this same wheel:
5000-002-010 (also written as 5000002010 or 5000-2-10): The common OEM part number used on Secure II, Epic II, and Zoom beds. The wheel hub is usually grey or dark grey.
3006-200-142: The part number used in Stryker S3 bed manuals for the white-hub version.
5050-002-050: Another cross-reference number used on Stryker stretcher chairs.
Can they be used together? Yes. Except for the hub color (grey vs. white), their outer diameter, hub width, bearing hole size, and load capacity are completely the same. If you do not mind the color difference, or if you are replacing all four wheels together, both part numbers can be used interchangeably.


Compatible Stryker Models
This replacement 6’’ stryker wheel fits the original caster forks on the following Stryker models:
Hospital Beds: Stryker Secure II (3002), S3 (3005), Epic II (2030), Zoom (2040)
Birthing Beds: Stryker LD304
Stretchers and Chairs: 5050 & 5051 Stretcher Chairs, 1080 Fluoroscopy Stretcher
Main Specifications and Materials
Item | Specification |
Wheel Size | 6" Nominal (5.75" actual outer diameter) |
Tread Material | Non-marking Polyurethane (PU) / TPE |
Wheel Core | High-strength nylon / engineering plastic |
Bearings | Double-sealed ball bearings |
Chemical Resistance | Resistant to common hospital disinfectants and cleaners |
The non-marking polyurethane tread runs quietly and will not leave black marks on hospital floors. The double-sealed bearings also help prevent hair, dust, and floor wax from entering the axle, which keeps the wheel rolling smoothly for a longer time.

When to Replace the Wheel & Simple Installation
You should check and replace the wheel if you find any of the following problems:
Weak braking: After long-term use, the outer tread wears down and becomes smaller, which makes the central brake slip.
Damaged tread: Cracks, uneven wear, or separation between the PU tread and the plastic core.
Noise or resistance: The wheel makes noise or feels heavy to push because the bearings are worn out or blocked by hair.
Replacement Steps:
1.Lift and safely support the bed frame so the wheel is off the ground.
2.Remove the axle bolt and lock-nut from the caster fork, then take out the old wheel.
3. Put the new wheel assembly into the caster fork and tighten the axle bolt and nut.
4.Put the bed back on the floor and test both the Brake and Steer pedals before using it again.
Why Choose Our Aftermarket Replacement?
Original OEM wheels often have long delivery times and high prices. Our replacement wheel is produced with strict size control so that the hub width and bearing hole fit original Stryker caster forks accurately. Whether you need a few spare wheels for daily hospital maintenance or bulk quantities for bed refurbishment projects, this 6" Molded Bed Wheel Assembly for Stryker 5000-002-010 / 5000002010 & 3006-200-142 provides reliable quality at a much better cost.
sales@casterwheelsco.com ; WeChat/WhatsApp: + 0086 - 137 3645 4395

