Yellow Green Heat Shrink Tubes
KY-HB
origin: China
packaging: Standard&according to customer's required
MOQ: 1000
China A Variety of Heat Shrink Sleeve with High-Quality, Leading A Variety of Heat Shrink Sleeve Manufacturers & Suppliers, find A Variety of Heat Shrink Sleeve Factory & Exporters.
Yellow Green Heat Shrink Tubes Thin Wall Heat Shrink Tubing , Ultra Thin Wall Heat Shrink Tubing is made of polyolefin material, Yellow Green Heat Shrink Tubes, Thin Heat Resistant Shrink Tubing has the function of insulation and protection. Wire Heat Shrink Tubing it applies to electric components, coating of the wire harness,and protection of the terminal junction of the electric wire and cable, at the same time, Electrical Heat Shrink Tubing it also has the function of color identification. It`s widely used in electrics, electronic industry, electrical industry, etc. Thin Wall Polyolefin Heat Shrink Tubing,Waterproof Heat Shrink Tubing is very flexible and is easily marked by hot-stamp or printwheel methods. Application: Features & Benefits: 1, Soft, insulate, low-temperature shrink, flame-resistant (except for the transparent) 2, Have good physical, chemical and electronic properties 3, No halogen, environmentally friendly 4, Shrink ratio: 2/1 5, Vertical Shrink ratio:≤±5% Operating Indexes 1,First Shrink Temp.:75 degrees C 2,Final Shrink Temp.:115 degrees C 3,Working Temp.:-55~125 degrees C Up to standard: Approvals Meet UL224 125degrees 600V VW-1 Product Properties Performance requirements Test Date Tensile Strength GB/T 1040 ≥10.4MPa(Before heat aging) 158 degrees C×168h ≥7.3MPa(After Heat aging) Elongation at break GB/T 1040 ≥200%(Before aging) 15 degrees C×168h ≥100%(After aging) Heat shock resistance 25 degrees C×4h No cracks and do not be sticky Heat cold bend resistance -3 degrees C×4h No cracks Breakdown strength GB/T 1408 ≥15kv/mm Withsatand boltage 600V 2500V,60s, No breakdown Pass 300V 1500V,60s No breakdown Pass Volume resistivity GB/T 1410 ≥1×1014Ω.cm corrosion resistance 158 degrees C×168h Pass Copper stability 158 degrees C×168h Pass Flame resistivity VW-1 Pass SIZE(MM) As supplied (mm) After recovered Standard Length(Meter) Application Range(mm) Inner diameter(D) Wall Thickness(T) Inner diameter ( d ) Wall thickness ( t ) m/roll φ0.6 0.9±0.2 0.20±0.05 ≤0.40 0.33±0.10 200 0.5~0.7 φ0.8 1.1±0.2 0.20±0.05 ≤0.50 0.33±0.10 200 0.6~0.8 φ1.0 1.5±0.2 0.20±0.05 ≤0.65 0.36±0.10 200 0.75~0.9 φ1.5 2.0±0.2 0.20±0.05 ≤0.85 0.36±0.10 200 0.95~1.4 φ2.5 3.0±0.2 0.25±0.05 ≤1.30 0.45±0.10 200 1.4~2.3 φ3.0 3.5±0.2 0.25±0.05 ≤1.50 0.45±0.10 200 1.6~2.7 φ2.0 2.5±0.2 0.25±0.05 ≤1.00 0.45±0.10 200 1.1~1.8 φ3.5 4.0±0.2 0.25±0.05 ≤1.80 0.45±0.10 200 1.9~3.2 φ4.0 4.5±0.2 0.25±0.05 ≤2.00 0.45±0.10 200 2.1~3.6 φ4.5 5.0±0.2 0.30±0.08 ≤2.30 0.56±0.10 100 2.4~4.0 φ5.0 5.5±0.2 0.30±0.08 ≤2.50 0.56±0.10 100 2.6~4.5 φ5.5 6.0±0.2 0.30±0.08 ≤2.75 0.56±0.10 100 2.85~5.0 φ6.0 6.5±0.2 0.30±0.08 ≤3.00 0.56±0.10 100 3.1~5.4 φ7.0 7.5±0.3 0.30±0.08 ≤3.50 0.56±0.10 100 3.7~6.3 φ8.0 8.5±0.3 0.30±0.08 ≤4.00 0.56±0.10 100 4.2~7.2 φ9.0 9.5±0.3 0.30±0.08 ≤4.50 0.56±0.10 100 4.7~8.0 φ10 10.5±0.3 0.30±0.08 ≤5.00 0.56±0.10 100 5.2~9.0 φ11 11.5±0.3 0.30±0.08 ≤5.50 0.56±0.10 100 5.7~10 .... ... ... ... ... ... ... φ210 ≥210 0.65±0.30 ≤105.0 1.30±0.30 25 110~205 φ230 ≥230 0.65±0.30 ≤115.0 1.30±0.30 25 120~225 φ250 ≥250 0.65±0.30 ≤125.0 1.30±0.30 25 130~240 Colors: Black, white, red, blue, yellow, green Pointed size and cutting according to the requests of customer Avg. Wall thickness = (max. Wall thickness + min. Wall thickness)/2 http://www.insulationtubing.com
*Your email address will not be published. Required fields are marked.