General Parts

Share us

TD42 Thermodynamic Steam trap

Description

TD42 Thermodynamic Steam trap

Brief Introduction.

TD42 Steam Trap is a kind of thermodynamic steam trap which is mainly used for the environment with low condensate back pressure and low capacity requirement, similar to Spirax Sarco Design.

Structural Characteristic.


1.Assembled with steam or air heat preservation mechanism and unaffected by the environmental humidity;
with operation frequency decreased, its service life prolonged.
2.Provided with filter screen and drainage valve .
3.The valve runs flexibly and reliably with large displacement.

Working Principle.


a.When device starts up,under the pressure from inlet,condensed water and air flow into steam trap and lift the disc,discharging condensed water quickly.

b.With high temperature condensed water flowing into the steam trap, secondary evaporation will arise,dynamic pressure rise and static pressure down,disc moves downward.

c.Meanwhile,secondary evapouration enter above the disc,pushing the disc move downward,stopping steam flowing out

d.With secondary evapouration condensing and forming more condensed water,steam trap start a new cycle.

Main Function.


The valve is applicable in the steam pipeline and equipment to avoid steam leakage and eliminate steam leakage in order to conserve energy and keep from water hammer and other faults.
Due to their compact design and cost effectiveness thermodynamic steam traps are widely used in applications where the condensate must be removed immediately from steam lines and steam equipment. They discharge the condensate near the saturation temperature.

Field of Application.

Pressure Rating: 1.6- 6.4 Mpa.
Nominal Diameter: DN15-50 mm.
Body Material: Steel WCB,Stainless Steel.
Standard flanges: DIN, ANSI, JIS.

Standard Screwed:NPT,BSP.

Main Technical Parameters and Indexes of Performance.

Nominal pressure

PN63

Maximun design pressure(PMA)

63bar g

Maximun design temperature(TMA)

400

Minimun design temperature(TMI)

-10

Maximun upstream pressure for saturated steam service(PMO)

42bar g

Maximun operating temperature(TMO)

400

Minimun operating temperature(TMIO)

0

Minimun differential pressure( PMiX )

0.25bar

Maximum cold hydraulic test pressure

95bar g


Material of Main Component.

Name of component

Material of component

Valve body, valve cover

WCB

Others

stainless steel


Main External Dimensions.

Product model

DN
(mm)

Connection

Dimension

L

H1

H2

TD42

15

Internal thread

80

47

54

20

Internal thread

90

52

59

25

Internal thread

95

59

62

32

Internal thread

105

70.5

89.5

40

Internal thread

110

70.5

89.5

50

Internal thread

120

70.5

104.5

TD42

15

Socket welded

80

47

54

20

Socket welded

90

52

59

25

Socket welded

95

59

62

32

Socket welded

105

70.5

89.5

40

Socket welded

110

70.5

89.5

50

Socket welded

120

70.5

104.5



pneumatic control valve, pneumatic regulating valve,

Read More

Previous

DP17 pilot operated pressure reducing valve...

Next

DIN 900 Series Spring Loaded Safety Relief Valve...

Yong Jia Goole Valve Co.,Ltd

Manufacture and sell control valve,pressure reducing valve,safety relief valve,steam trap,strainer,api valve,din valve

Read More

Contact

Tel: 86-577-57789960
Address:
Heyi Industrial Zone,Oubei Town, Zhejiang, China, 325105

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多