Steel Grit G50 Blasting Abrasive for Ship Body blasting

G50

Average Bulk:
Price: USD 580.00/Ton
MOQ: 10 Ton

China Manufacture with Factory/Abrasive Sandblasting/Steel Grit G25 G50 G80 for Cleaning Before Painting

China manufacture with Factory/Abrasive Sandblasting/Steel Grit G25 G50 G80 for cleaning before painting

1.Steel grit picture
Steel grit meet American SAE standard, have Moderate hardness, toughness, impact resistance, long lifetime, good elasticity and adhesion, low consumption, good technical effect.


2.Steel grit specification

Project Quality
C 0.8-1.2%
Si 0.4-1.2%
Mn 0.6-1.2%
Cr 0.26%
Hardness GP 41-50HRC; GL 50-55HRC; GH 63-68HRC
Density 7.6g/cm3
Micro structure Martensite structure
Appearance Spherical
Hollow particles<5% Crack particle<3%
Type G120,G80,G50,G40,G25,G18,G16,G14,G12,G10
Diameter 0.2mm,0.3mm,0.5mm,0.7mm,1.0mm,1.2mm,1.4mm,1.6mm,2.0mm,2.5mm
Application 1.Blast cleaning: Used for blast cleaning of casting, die-casting,forging; sand removal of casting, steel plate, H type steel, steel structure.
2..Rust removal: Rust removal of casting, forging, steel plate, H type steel,steel structure.
3.Shot peening: Shot penning of gear, heat treated parts.
4.Shot blasting: Shot blasting of profile steel, ship board, steel board, steel material,steel structure.

3.Steel grit application
(1)Sandblasting for Shipbuilding
With grit blasting, oxygenated surface of ship hull is descaled,then improved the coating quality.
(2)Castings Surface Pre-treatment
Steel grit can also be used for surface pre-treatment,cleaning and descaling for casting parts.
(3)Bridge and Steel Construction
Pre-treatment and descaling for metal surface,increasing coating quality and antisepsis ability.
(4)Cleaning
Blast cleaning, forging, casting deoxidization, cleaning H section steel, stainless steel structure.
(5)Derusting
Casting rust, forgings, rust removing, iron removal, steel derusting, h-steel derusting, steel structure derusting.
(6)Reinforcement
Heat treatment part shot shot strengthening, gear shot strengthening.



4.Steel grit package
1. 25kg per bag(pp bag or paper bag), then 40 bags put in a 1000kg (2200lb) bulk bag.
2. 25 kg per bag(pp bag or paper bag), then 40 bags shrink wrapped onto a 1000kg (2200lb) pallet.
3. 25 kg per bag(pp bag or paper bag), then 40 bags in one box.
4. One ton loose in one ton bulk bag.
5. All pakages are lined with waterproof materials.
6. Gnerally, one 20GP container can load 25 tons, 27 tons at most.
We can also pakage according to costomers' requirements.


5.Steel grit test and SGS report



6.Steel grit production



7.Company profile
Jinan Junda Industrial Technology Co.,Ltd. , authorized by Honest Horse (CHINA) Holding Limited, is established in 2005. Our company headquarters is located in Jinan city,Shandong Province,China. We are the manufacturer of abrasive media in north China which products
include
bearing steel grit, cast steel grit, cast steel grit, steel shot and garnet sand.
based on our good qualified product and good service,we have a good reputation among our customers. And we welcome customers all over the world do cooperation with us!



8.RFQ
Q1. What is the mode of your payment?
T/T: 50% advance payment and the rest 50% payment oay us when you get the scanned B/L from our E-mail.
L/C:100% irrevocable L/C at sight.
Q2. What's the MOQ of your product?
As usual MOQ is 5TONS.Or as your require, we need to calculate the new price to you.

Q3. Can you provide the free samples?
Yes, we can send free samples less than 500g to you. Normally, we can send samples to customer by
express, such as DHL,TNT,Fedex,Aramex, etc.
Q4. What atandars you carring out for your products?
SAE standard and ISO9001, SGS.

Get Quote
Send Inquiry by feedback form learn more about product detail, price, etc
*Your email address will not be published. Required fields are marked.