Sensor 1200W SET-P02C
Welcome to use SET-P02C Infrared motion sensor!
The product is a new saving-energy switch, it adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely.
Power Source: 220 -240V/AC Detection Range: 180°
Power Frequency: 50Hz Working Temperature: -20~+40℃
Ambient Light: 3-2000LUX (adjustable) Working Humidity: <93%RH
Time-Delay: min: 10sec±3sec Installation Height: 1.8m~2.5m
max: 10min±3min Power Consumption: 0.45W (work)
Rated Load: 1200W (incandescent lamp) 0.1W (static)
300W(energy-saving lamp) Detection Motion Speed：0.6~1.5m/s
Detection Distance: 5-12m (<24℃) (adjustable)
Ø Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern.
Ø SENS adjustable: It can be adjusted according to using location; low sensitivity with 5m for detection distance; high sensitivity with 12m, it fits for large room.
Ø Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time).
Ø Time-delay adjustment: It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 10min±3min.PIR Sensors,