Non-metallic Mineral Products

1. Home
2. Products
3. Minerals & Metallurgy
4. Non-metallic Mineral Products

Share us

HY-908 TDS Organoclay Bentonicte

No.1-1

Send Inquiry

Description

YH-908 is an organoclay (tetraallkyl ammonium bentonite) for solvent-based systems of low,Website:http://www.organophilic-clays.com,medium and high polarity.1.Advantages:☆ High gelling efficiency over low, medium and high polarity organic liquids, especially in 200#solovent oil, coal tar, aromatic compounds.☆ Produce reproducible thixotropic consistency over a wide temperature range.?☆ High viscosity and excellent thickening property over a wide temperature range.☆ Imparts particle suspension, preventing hard settling of pigment and fillers.☆ Exerts strong film reinforce action in organic binder systems.2.Typical Properties:ColorAppearanceDensityMoisture(@105℃,2hrs)Fineness through 200 meshLoss on Ignition( @1000℃ )Light WhiteFree Flowing Powder1.7g/cm3≤3.5%≥98%≤35%3.Typical Applications:●Alkyd paint●Zinc-rich paint●Anti-corrosion paint●Inks(mineral oil)●Bituminous paint●Inks(Nitro)●Chlorinated rubber paint●Adhesive●Marine paint●Putties and sealant●None solvent epoxy paint●Lubricating grease●Primer paint●Oil drilling mud●Road paint●Waster water treatment●Silica paint4.Incorporations:YH-908 belongs to the conventional type of organoclay group, which requires mechanical energy, shear forces applied with a goods dispersion equipment, and a chemical (polar) activator to reach the proper level of delamination of the organoclay platelet stacks.Polar Activator: Dosage of polar activator (such as 95%ethanol, 95%methanol, 95%acetone or propylene carbonate)is 30%-50% by weight of YH-908It is always recommended to determine the proper level of addition by experiment. Either defect or excess of chemical activator would result?in poorer viscosity development.5.Recommended Levels:The amount of YH-908 rheological additive required depends upon the type of organic system and the degree of thickening or other properties desired. Addition levels are typically between 0.2%-2.0% based on the total?formulation weight.6.International Countertypes: Bentone?52,Tixogel? VP,Claytone?HT. ? ?

Read More