Machinery & Equipment

Share us

Hydraulic Curving Machine with Line Speed 0-10m / min for Arch Roof Panel

According to profile

Description

Hydraulic Curving Machine with Line Speed 0-10m / min for Arch Roof Panel

?

Hydraulic Arch crimping machine is and bending machine for roof panel and used to crimp the formed corrugated sheets into horizontal stripes through hydraulic crimping mold. The distance between each press will decide the curvature of the arch. It is suitable for edge of buildings, parking garage, pavilion and various round roofs of buildings. The Composition of hydraulic Arch crimping machine Crimping main machine and Control panel, this crimping machine can crimp both ends of roofing sheet.

- - - -
Hydraulic arch crimping machine technology Specification |
Formed Profile Type: | Arch Roof panel |
Raw material thickness: | 0.3-1.0 mm |
Corrugated Punching moulds | CR12, HRC55-60 |
Line speed: | 0-10m/min |
Feeding mode: | Servo motor, 1kw |
Main power: | 0.85KW |
Hydraulic station power | 5.5KW |
Electrical control system | PLC |
Max. bending angle | 120 |
Machine size | 3000 mm×1400mm×1400 mm |
- - - -

cheap prodocuts, china suppliers,

Read More

Previous

Hydraulic Bending Machine with HRC55-60 Corrugated Punching Moulds for Roofing Sheet...

Previous

18.5kw Metal Decking Sheets Roll Forming Machine Used on High Buildings...

Jiangyin Dingbo Technology CO., Ltd

Steel Tile Forming Machine,Roof Panel Roll Forming Machine,Corrugated Roll Forming Machine

Address: 3#Xingyuan Road, Gu Shan Town, Jiangyin city, Jiangsu province, China,
wuxi, Jiangsu
China, 214000

Tel: 86-510-86952128
Fax: 86-510-86952138

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多