Electronics Production Machinery

1. Home
2. Products
3. Electronic & Electrical
4. Electronics Production Machinery

Share us

2dB WIFI Omni Antenna External / 2.4 Ghz Wifi Antenna Black SMA Connector For Wireless Router

ZL-2G2DCF-004

Send Inquiry

Description

2dB WIFI Omni Antenna External / 2.4 Ghz Wifi Antenna Black SMA Connector For Wireless Router?

?

?

Detail Product Description

?

Frequency: 2.4?~ 2.5?GHz

S.W.R: 2.0 MAX

Impedance:　50 ohm

Peak Gain: 2 dB

Return Loss:?- 10dB (Max)

Connector: RP-SMA Male; SMA Male.

Radiation:?Omni - Directional

Polarization:?Linear Vertical

Operating Temperature:?- 30 °C ~ + 80 °C

?

Application:

?

1. Wi-Fi /WLAN /MEMO /Bluetooth System

2. Router

3. IEEE802.11 WLAN System

4. Wireless Communication System

?

?

Specification:

?

- - - -
Product Name | 2.4Ghz 2dBi External WIFI Omni Antenna Black SMA connector |
Electrical Specification |
Frequency Range | 2.4 - 2.5GHz |
Radiation Pattern | Omni - Directional |
Gain-dBi | 2dBi,3dBi,5dBi,7dBi,9dBi etc. |
S.W.R | ≤2.0 |
Nominal Impedance | 50Ω |
Polarization | Linear Vertical |
Max. Power | ? |
Connector | RP - SMA Male Or customized SMA / TNC / BNC / FME |
Mechanical Specification |
Antenna Dimension-mm | Customized |
Body | ABS, Black |
Operating Temperature | - 30°C?~ +?80°C |
Storage Temperature | - 40°C?~ +?80°C |
- - - -

?

?

Characteristics and Reliability Test

?

- - - -
Test Items | Test Condition and Procedure | Requirements |
C1 | S.W.R. | Set DUT on Network Analyzer; make individual calibration to test | Directive DUT specification |
M1 | Vibration | MIL-STD-202G, 201A Amplitude: 0.03 inch (0.76mm); Freq: 10 to 55 Hz 3 directions; 2 hours for each direction | 1. No Visual Damage 2. Frequency Tol.<= 5% |
M2 | Random Drop | Height: 1.5 Meter; 3 directions; 1 time for each direction | 1. No parts separated 2. Frequency Tol.<= 5% |
M3 | Solderability | MIL-STD-202G, 210F, cond. A Solder iron: 350±10°C; Duration: 5 seconds | 1. Mounted on PCB 2. No Visual Damage |
M4 | Terminal- Pull Test | MIL-STD-202G, 211A, cond. A Holding with individual specification; force applied to axis of terminal | 1. Directive DUT specification 2. Frequency Tol.<= 5% |
M5 | Dimension | Inspection of dimension, color, material, package, surface process | Directive DUT specification |
E1 | Salt Spray | MIL-STD-202G, 101E, cond. B Temp: 35°C; RH: >= 95%; NaCl solution: >= 5%; Time: 48 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
E2 | Humidity | MIL-STD-202G, 103B, cond. B Temp: 40°C; RH: >= 95%; Time: 48 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
E3 | Thermal Shock | 1 Cycle: - 40°C (30 minutes) to + 80°C (30 minutes) Cycles: 24 | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
E4 | Life (High Temp.) | MIL-STD-202G, 108A, cond. A Temp: 85°C; Time: 96 hours | After 2 Hours Recovery 1. No Visual Damage 2. Frequency Tol.<= 5% |
R1 | RoHS | With Reference to IEC 62321:2008 with flow chart | Directive RoHS 2002/95/EC |
R2 | PFOS | With Reference to USA EPA 3540C:1996 by LC/MS | Directive RoHS 2006/122/EC |
R3 | PFOA | With Reference to USA EPA 3540C:1996 by LC/MS | Directive RoHS 2006/122/EC |
- - - -

?

?

Read More