Oxygen Setup
Dual - Diameter POM Water Hose Connector Pressure Switch Unloader Valve in Pure Water Applications
DY
Description
Water Dispense and Pure Water Applications Push Fit Low Pressure Switch Valve
?
Description:
# # Polyformaldehyde plastic body.
# Suitable for water and food use.
# Handles pressures up to 145 psi (10 bar),bursting pressure is 435 psi(30 bar) an operating temperature range of -20 to +60 degrees C, and a vacuum capability of 750 mm Hg Meets?
# Can be mounted on a wall or adjacent surface using staples
# Full port flow for higher operating efficiency than standard port
# Inline valve for connecting two pipes going in the same direction
# Push-to-connect ends for tight seals
Applications:
?
Push fit low pressure valves?are used in various applications, including radiant heating system,drinks dispense, pure water applications, reverse osmosis system, and water purification system, among others.
?
Competitive Advantage:
?
SPE?Low Pressure Drop. These slim, inline switches reduce pressure drop to a minimum. They incorporate a unique, dual-diameter, internal bore and piston configuration to minimize flow constriction. Liquids are able to smoothly pass around the piston and flow through the switch with little pressure loss to the down stream line.
?
Warning
?
When tighting threaded fittings,use care nor to over-torque the fitting as this?may damage the fitting and cause a leak or other failure.
Read More
Ningbo Shunchi Pneumatic Element Co., Ltd.
Pneumatic Push Fittings,NPT Threaded Fittings,Pneumatic Hose Fittings
Address: #65 Guangming West Road,Lishan,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-62243568
Fax: 86-574-62245568
