Agriculture Equipment & Supplies
Description
Electrical Machine Drive Non Clogging Overhung Impeller Centrifugal Pump Of Cast Iron
?
Description:
According to the current papermaking process and the actual usage, the product is designed on the base of foreign advanced technology. It adopts open impeller with three blades, and the gap between the impeller and the side panel can be adjusted, which can make the impeller operating stably and continuously. The weight of non-clog impeller is light, so the efficiency is high and operation is stable. In addition, the motor power is smaller than other widely used ones.
?
- - - -
The feature of the product: |
Check from the pump inlet, the impeller is counterclockwise. Inhalation of the liquid along the axis, the horizontal direction of emission. |
The pump adopts single-suction overhung structure, and the main parts: pump casing, impeller, back cover, shaft, suspension, etc. |
The pump adopts open-door structure, so it is no need to remove the line when maintenance. |
Pump shaft is supported by two rolling bearings or one angular contact ball bearing and one ball bearing. And they are lubricated by thin oil. |
The pump is driven by motor directly |
When use open type impeller, the liquid will contain certain gas; and the clearance between impeller and side cover can be adjusted, so the impeller can remain a constant clearance and continuous high performance |
- - - -
?
Parameter:
Capacity: 12.5-1600m3/h
Head: 5-80m
The pulp concentration:≤4%
Working temperature: ≤80C
Special requirements can be given according to the special requirements.
?
Read More
PARAGON INDUSTRIAL company
Paper Pulp Pump,Centrifugal Water Pump,Chemical Process Pump
Address: Hongken Farm, Xiaoshan District, Hangzhou City, ZHejiang Province, China,
Hangzhou, Zhejiang
China, 310000
Tel: 86-571-82829391
Fax: 86-0571-82829393
