Motors & Engines

1. Home
2. Products
3. Electronic & Electrical
4. Motors & Engines

Share us

Air Clooing Industrial X Ray Inspection Equipment 300KV 5mA With 2.5×2.5 Focus Size

XXG-3005

Send Inquiry

Description

XXG-3005 Industrial X ray Machine with Portable directional 300KV 5mA
?
Application
?
industry x ray machine directional portable x-ray ndt flaw consists of three parts,controller, generator and connection cable . mainly used for testing internal defect of steel, such as entrapped slag, blowhole,bubble etc and welding seam inspection of boiler,shipbuilding,airplane and national defense etc industry field,It also benefits to operate outdoor , because of simply operation, being convenient to carry.
?
Parameters
?

- - - -
Model | XXG-3005 |
Tube | Ceramic |
Output voltage | 170-300 KV |
Focus size | 2.5×2.5 mm |
Radiation angle | 40° |
Penetration | FE 50mm |
Generator size | 330×330×685mm |
Generator weight | 35kg |
Controller size | 380×380×190 mm |
Controller weight | 12 kg |
Input power | AC 185-245V @50~60Hz |
Cooling | Air
? |
- - - -
?Introduction??1. It can still work by applying special design what can avoid the interference by power grid change.2. We are using highpower electronic components,such as capacitance and power module with wide capability to greatly ensure the quality of the products.3. Apply the isolation technology of low voltage and high voltage to ensure the controller working stablely.4. Posses the reliable “time-delayed” function, suitable to operate in the open field.5. It has functions of troubleshooting automatically and pressure indication to guarantee the stability of working.??
?

?
Distinguishing feature?# Parameter setting,working process and trouble indication will be indicated on the LED lamp.
# Independent ageing key is designed for age the machine conveniently.
# Radiating time to cooling time is 1:1.
# The water and dust proof color panel and digital sound keyboard are introduced that exposure parameters are promptly and accurately selected.
# Ensure safety useing the instrument,it is installed with overvoltage,undervoltage,overcurrent,undercurrent and overtemperature protection device.
# Adopting the wider range of kv value, and solve the difficulty problem of short radiographic range.
# Exposure delay function——the delay time can be set less than 10 minutes to keep the operator safe from working place.
# Match with various generator and function reliably.
# With the outlet of ray warning lamp and wire connecting terminal of door-machine interlock.(Door-machine interlock——when the lead door open ,the instrument cut off the high voltage automatically to protect the operator)

?
?

?
?
?
?Composition and Application
?
x ray flaw detector consists of three parts,controller, generator and connection cable .X Ray flaw detector plays important parts in carrying on nondestructive examination for nonmetallic, light metal, casting, various alloys and pressure vessels etc, mainly detecting weld defects ,such as crack, blowhole, entrapped slag, incomplete fusion ,blowhole,bubble etc ,also using for shipbuilding ,airplane and national defense etc industry fiel.?Matters needing attention?(1) The X ray generator in the car, forklift, must stand (fan end in), while below the mat cushion, if must be sideways when carrying rings at both ends to pad the damping material to prevent shock.(2) ?Using the temperature controller in the -10 to +40 DEG C, rain prohibited, to avoid danger or damage the instrument to prevent joint components caused by frost in winter, poor insulation.(3) ?Because of the system work, to produce a high voltage pulse controller, induction to the housing, to connect the ground when necessary. When erecting generator in welding plate and the workpiece, the generator with iron and workpiece distance, avoid the welding current through the generator, the low voltage cable into the control box will damage to the machine.?
?
?
?

Read More