Electronic Signs

1. Home
2. Products
3. Electronic & Electrical
4. Electronic Signs

Share us

Mobile Mini High Frequency Soldering Station , Electric Soldering Machine

RT-S0150

Send Inquiry

Description

?

Efficiency Continue Soldering Tools YMK High Frequency Soldering Station RT-S0150

?

?

Technology YMK Soldering Station:


■ Reliability and security much higher than the switch power supply.

■ High quality ring transformer.
■ Rolled iron core uses the new high quality silicon steel sheet.
■ Winding adopts high temperature resistant high quality copper enameled wire enameled wire winding.
■ Power wastage loss less than 25%, electrical efficiency is as high as above 95%.
■ Unload current Only 10% from the EI type; no electromagnetic radiation and no vibration noise.

?

?

Auto Sleep Mode Operation:

?

If you have been chose the working mode with “ auto sleep & auto shutdown” , it will be show “ ---“ in display if soldering iron not use for over 20 minutes, by now the temperature of soldering tip will be down to 200 °C if the setting working temperature greater or equal to 200 °C or down to 50°C if the setting working temperature below 200 °C , station will keep this temperature until recover the soldering.

?

There are three ways to wake up sleeping:

1. Turn off the power switch and then turn on again.

2. Press any button in Station.

3. Pick up the soldering iron.

?

Please attention that it can’t wake up If the Soldering station over 40 minutes in sleeping condition, soldering iron will cut off the power supply in automatically and no any showing in display.

?

?

Soldering Station Arguments:

?

- - - -
Power | 150W |
Output voltage | AC36V,380KHZ |
Temperature range | 50~600 °C (depending on the mode setting) |
Maximum ambient temperature | 42 °C |
Temperature stability | ±2 °C (in still air, no load) |
Housing Material | Aluminum Alloy |
Size | 110*105*175mm |
Net weight | 2.6KG |
- - - -

?

?

Set Temperature in YMK Soldering Station:

?

Way 1: press & quot; +& quot; & & quot;-& quot; button to adjust the temperature you want, and then press ＊ button for confirmation.

?

Way 2: press ＊ button in first and then press & quot; +& quot; & & quot;-& quot; button in same time, Hundred Digit is flash, press & quot; +& quot; or & quot;-& quot; button to find the exactly data, then press ＊ button to move to Ten Digit, Tem Digit is flash too, again press & quot; +& quot; or & quot;-& quot; button to find the exactly data; press ＊ button to move to Single Digit, Single Digit flash as well, press & quot; +& quot; or & quot;-& quot; button to find the exactly data, finally, press ＊ button one more time for the final confirm.

?

?

Theory YMK High Frequency Soldering Station:


Adopt high frequency eddy current heating (induction heating principle), High frequency Lead free soldering station is heat up at soldering tip itself, and no heat conduction, reduce thermal losses, heat up fast and temperature returning quickly.

?

?



?

Picture:

?

?



?

?

Read More