Industrial Supplies Stocks

Share us

Delem controller system CNC Press Brake Machine 100 ton 3200mm / 4000mm

WE67K-100/3200-4000;WC67K-100/3200-4000

Description

Delem Controller System CNC Press Brake Machine 100 Ton 3200mm / 4000mm

?

?

Production Introduction:

1. With stylish design, high rigidity, high speed

2. Electro-hydraulic servo system, closed loop control system controls accuracy

3. Worktable adopts hydraulic deflection compensation to ensure the accuracy of the workpiece

4. Back gauge is driven by servo motor, adopted ball-screw and linear guide way, it could make sure positioning accuracy.

?

Technical Details:

Mode: WC67K-100/3200

Norminal Press: 100?ton

Length of Table: 3200mm

Distance between Housing: 2650mm

Throat Depth: 320mm

Ram Stroke: 100mm

Ram Speed: 60/8/40 mm/s

Open Height: 365?mm

Controller System: Chinese Famouse Brand: Estun E21, with ball screw, inveter, encoder to control two axis: ? ? X&Y

Main Motor: 7.5 Kw

Volume of oil tank: 280L

Weight: 7500 kgs

Overall Dimensions: L 3430 mm

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?W 1820?mm

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?H 2495?mm

?

Model: WE67K-100/3200

Technical Details:

Norminal Press: 100?ton

Length of Table: 3200mm

Distance between Housing: 2650mm

Throat Depth: 320mm

Ram Stroke: 200mm

Ram Speed: 120/10/110?mm/s

Open Height: 475?mm

Main Motor: 7.5?Kw

Controller System: 1. Netherland Brand: Delem DA 52 2+1 axis: Y1,Y2+ worktable crowning system

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 2. Netherland Brand: Delem DA52 3+1 axis: Y1,Y2, X + worktable crowning system

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 3. Nether land Brand: Delem DA65W 4+1 axis: Y1,Y2,X,R+ worktable crowning system

Volume of oil tank: 380L

Weight: 8700?kgs

Overall Dimensions: L 3450?mm

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?W 1955?mm

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?H 2565?mm

?

Mode: WC67K-100/4000

Norminal Press: 100 ton

Length of Table: 4000mm

Distance between Housing: 3100mm

Throat Depth: 320mm

Ram Stroke: 100mm

Ram Speed: 60/8/40 mm/s

Open Height: 365 mm

Controller System: Chinese Famouse Brand: Estun E21, with ball screw, inveter, encoder to control two axis: X&Y

Main Motor: 7.5 Kw

Volume of oil tank: 280L

Weight: 8500 kgs

Overall Dimensions: L 4330 mm

W 1820 mm

H 2575 mm

?

Model: WE67K-100/4000

Technical Details:

Norminal Press: 100 ton

Length of Table: 4000mm

Distance between Housing: 3100mm

Throat Depth: 320mm

Ram Stroke: 200mm

Ram Speed: 120/10/110 mm/s

Open Height: 475 mm

Main Motor: 7.5 Kw

Controller System: 1. Netherland Brand: Delem DA 52 2+1 axis: Y1,Y2+ worktable crowning system

2. Netherland Brand: Delem DA52 3+1 axis: Y1,Y2, X + worktable crowning system

3. Nether land Brand: Delem DA65W 4+1 axis: Y1,Y2,X,R+ worktable crowning system

Volume of oil tank: 380L

Weight: 11000 kgs

Overall Dimensions: L 4250 mm

W 1955 mm

H 2855 mm

?

Main Performance :

1 The frame of machine is composed of tank, worktable, left and right housings and ram. So it has high strength and good rigidity. Also it takes vibration to eliminate stress.

2 Adopting electric-hydraulic proportional valve to ensure the synchronization of both cylinders. The proportional valve is made by BOSCH company with very good performance such as small friction, fine electronic amplifier and electric magnet with high controlling force and continuous action. There are two raster displayers on both sides of machine to inspect the position of ram continuously and feed back the signal to control system, then the control system will control electric-hydraulic valve to make two cylinders synchronization on one machine. Because the raster displayers are installed to “C” plates, not on housing plates directly, the deflection of ram and frame when working will not effect its measuring and controlling precision.

3 Through computer,the operator could communicate with machine. The computer has several service language, calculate and adjust the bending force automatically. Also it could calculate and control the dead point, speed changing point.The strokes (Y1, Y2) of ram could make a small tilt to meet the special requirement of user.

4 Equipped with good guiding system, position measuring system and hydraulic balance system to meet the requirements of full length job and eccentric job.

5 Worktable compensation unit is adopted to make up for deflection of machine when working to make sure the precision of work piece.

6 The surface of cylinder has good wearing and heat treatment, so it has good lubrication and long service life.

?

?



?

?

?

?

?

?

cheap prodocuts, china suppliers,

Read More

Previous

Holland Brand Controller Hydraulic Press Brake Machine 80 Ton 2500mm...

Previous

Metal Frame Cnc Sheet Metal Brake Machine 125 Ton 2500mm/3200mm/4000mm...

WUXI JINQIU MACHINERY CO.,LTD

CNC Press Brake,Pipe Making Machine,Slitting Line

Address: 99#, Qianluo Road, Qianqiao Town, Wuxi City, China,
Wuxi, Jiangsu
China, 214000

Tel: 86-134-00027899
Fax: 86-510-83211539

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多