Machinery & Equipment
Description
?
?
Extrusion Stretch Blow Molding Machinery , 60KN Plastic Bottle Blowing Machine
?
?
Machine main components adopt world famous brand, e.g.:
? PLC: MITSUBISHI (JAPAN),
? SCREEN: DELTA (TAIWAN)
? CONDUCTOR: SCHNEIDER(FRANCE)
? AIR SWITCH: MERIINGERIN (FRANCE)
? TRANSDUCER: DELTA (TAIWAN)
? POWER RESOURCE: MEAN WELL(TAIWAN)
? OIL PUMP: YUKEN (JAPAN)
? VALVE: YUKEN (JAPAN)
? SOLENOID VALVE: AIRTAC(TAIWAN)
? PARISON CONTROL SYSTEM: MOOG(JAPAN)
? OIL PIPE, JOINT: LIANHUI(TAIWAN)
?
?
Specifications:
- - - -
HST-5L EBMM Technical Parameters |
Max Product Volume | (L) | 5 |
Working station | - | 1 |
Screw Diameter | (mm) | 60 |
Screw L/D ratio | (L/D) | 22~30 |
Screw drive power | (KW) | 15~18.5 |
Screw heating capacity | (KW) | 5.04~6.7 |
No.of heating zone | (ZONE) | 3~4 |
Output of HDPE | (kg/h) | 65~80 |
Output of PVC | (kg/h) | 70~85 |
Oil pump drive power | (KW) | 7.5 |
Clamping force | (KN) | 60 |
Platen distance | (mm) | 148~508 |
Max.Size of Mold | (W×H)(mm) | 370×390 |
Capacity | (L) | ? |
Max.Die diameter | (mm) | 145 |
Die heat capacity | (KW) | 2.5 |
No.of heating zone | (ZONE) | 3 |
Central distance of bi-die | (mm) | 160 |
Max.Die diameter(Bi-head) | (mm) | 80 |
No.of heating zone | (ZONE) | 3 |
Heating capacity | (KW) | 2.88 |
Blowing pressure | (Mpa) | 0.6 |
Air volume | (M3/MIN) | 0.4 |
Cooling water pressure | (Mpa) | 0.2~0.3 |
Water consumption | (L/MIN) | 50 |
Size of machine | (L×W×H)(m) | 2.85×1.77×2.58 |
Weight of machine | (TON) | 6.0 |
- - - -
?
?
Main Features:
1) Electrical control system: The machine works under the PLC control(made by the Mitsubishi Co. of Japan) via a man-and-machine interface(displayed in Chinese version or in English version).The machine is equipped with a modularized temperature controller and operated through a touch-type coloure screen.All the production data can be set up,modified,searched and monitored and the machine trouble diagnosis can be completed both on the touch-type screen.The electric elements work on the non-contact working principle,thus being durable in service life.
2) Hydraulic system:The machine works under the proportional pressure control. The machine is equipped with hydraulic valves and hydraulic pumps imported from world-famous companies,thus assuring consistent and reliable working performance.
3) Plasticizing system:The high performance screw used on the machine assures thorough and homogeneous plasticization and mixing of plastics.
4) Speed regulation system:Frequency-converter-controlled speed regulator + speed change gearbox with hardened alloy steel gears.Speed regulation can be completed smoothly with less noise generated.Therefore the machine is durable in service life.
5) Mould opening,closing & moving system:A big 3-point central beam mechanism for opening & closing the mould halves and locking the mould assures balanced distribution of locking force and is free of any deformation after long-time operation.The mould is horizontally moved on linear spherical ball guideways at high traveling accuracy and rapid speed and with less resistance.
6) Air-bolowing needle bracket:The air-blowing needle bracket is of solid L-square design.The sturdy bracket assures smoothness of the product cut. ? ? ?
?
Read More
Previous
Bottle Extrusion Blow Moulding Machine , 2L Blow Molding Equipment...
Hisson Plastic Machinery Co. Limited
Plastic Injection Molding Machine,Hydraulic Injection Molding Machine,Horizontal Injection Molding Machine
Address: Room 705, No.2-6, Green Life Square, Simingzhong Road, Yingzhou, Ningbo, China.,
Ningbo, Zhejiang
China, 315000
Tel: 86-574-87170279
Fax: 86-574-87170428
