Hardware & Tools

Share us

IEC60335 IEC Test Equipment Kettle Insert Withdraw Endurance Test Device

KP-1

Description

Kettle Insert-withdraw Endurance Test Device
?
?
Product information:
?
The kettle insert-withdraw endurance test device is designed and manufactured according to the standard IEC60335 -2- 15 which is used to test the cordless kettle plug life.
?
?
Test principle and product feature:
?
Test principle:The device is driven by the motor and crank connecting link. And the kettle is pulled out for 10000 times at the rate of 10 times per minute. Then under the circumstance without power supply, the test is done for another 10000 times. When doing the load test, the two conductive pins are shorted with the external load of the rated voltage and 11 times of rated current.
Product feature:The equipment inside is equipped with load, so it is unnecessary to connect with external one. Insert the sample into the Load interface, thus the load test can be achieved. There are two test modes of this device: automatic test and manual test. When it is switched into the automatic test, the device automatically switches to the conducting test (Mechanical Lifespan Test) after 10000 times of load test on kettle;when it is switched into the manual test, the load test and the conducting test can be achieved separately for satisfying the requirements of different samples. The number of trials (up to 999999 times) can be preset. The device automatically records the number of tests and the number of conduction in the running. When the preset number of times is reached, the device automatically shuts down.
?
?
Technical parameters:
?

- - - -
No. | Item | Parameters |
1 | Power supply | AC220V 50Hz |
2 | Test station | 1 |
3 | Drive mode | adjustable-speed motor+ crank connecting link |
4 | Working stroke | 100mm |
5 | Working rate | 10 times/min(frequency control) |
6 | Total number of times | 1~999999 |
7 | load/conducting test times | 1~999999 |
8 | Clamp | Horizontal clamp and vertical clamp |
9 | Load current | 1.1times of rated current. adjustable |
10 | Automatic test and manual test | Switchable |
- - - -
?
?

?
About Us:
?
HongTong Electromechanical Co., Ltd is a leading company in inspection equipment industry, established in 2003 and located in Guangdong, China. Our company introduced advanced equipment, combined with the most advanced technology production processes, strict quality control system to control the entire process of production. The company combined with a number of high-tech management personnel and advanced equipment, and together with the modern management, computer design and control, our products has reached the international advanced level. The company set R&D design, production, sales as one, specializing in producing electric wire inspection equipment of plug and socket, mechanical robustness testing equipment of electronics, inspection equipment of electronics’ on-fire danger, testing indicator of anti-electric shock and solid objects& acute; entry, general inspection equipment, and other non-standard testing equipment. Our products enhance good selling at home and abroad, and have established supply relationships with a number of well-known companies.

cheap prodocuts, china suppliers,

Read More

Previous

IEC60068-2-63 Adjustable IEC Test Equipment Spring Operated Impact Hammer...

Previous

PLC Control IEC Test Equipment Microwave Oven Door Endurance Tester...

HongTong Electromechanical Co., Ltd.

IEC Test Equipment,Flammability Testing Equipment,Ingress Protection Test Equipment

Address: KeJing Road, Sanshan Technology Creative Park,
Foshan, Guangdong
China, 528000

Tel: 86-757-81775285
Fax: 86-757-81775285

H5响应式定制设计
26种语言,SEO营销型网站


H5/响应式/营销型企业网站; 26种语言扩展;
覆盖: 英文、法语、德语、西班牙语、葡萄牙语、俄语、阿拉伯语、波斯语、日语、韩语
了解更多