Refrigeration & Heat Exchange
Automatic Double Station Hollow Bottle Blow Molding Machine For 1l-5l Plastic Bottles
BT-double station
Description
BT full automatic double-station bottle blowing machine
?
The automatic blow molding machines, A wide variety of materials can be used for the machine, which are suitable for producing 1-5L PE plastic bottle.?The clamping system is a high-precision double-station linear guide, extrusion system using a hard gear reducer and inverter. The die head system adopts central-incoming extrusion die made of special steel, imported hydraulic valve and seal parts with proportional control valve. The control system consists of PLC and Human-machine interface imported from Japan, an automatic temperature control module and imported electrical parts.
?
Main Characteristic:
?
1. ?Two station,?single layer, 65mm screw, 20kw motor, PE / PP etc.
?
2.? Power supply: 380VAC,? 50Hz? (depending on client& acute;s county ).
?
3. ?Die Head for choosing:
???? One head (2L-5L):? 5L---around 180 bottles per hour
?
??? Two head (1L-2L):? 2L---around 350?bottles per hour
?
??? Three head (? 500ml to 1L):? 1L---around 800 bottles per hour
?
???? Four head (up to 500ml):? 500ml---around 1000 bottles per hour
?
??????????????????????????????????????????????? ?250ml---around 1500?bottles per hour
?
4. Center Distance: Two Die head: 120mm,??? Three Die head: 100mm,???????Four Die Head: 80mm
?
5. Deflashing system: Neck/ handle/ bottom deflashing
?
?
The main technical parameters
?
- - - -
Model | BT automatic double location blowing machine | Maximum capacity | 10L |
Screw diameter | 80mm (38CrMoAla) | Screw hotting power | 15kw |
Oil hydraulic pump power | 11kw | Main motor power | 22kw |
Length to diameter ration(L/D) | 25:1 | Max. Production (width X thickness) | 275x300 |
Economic speed | 180pcs/h | platen max. open width | 650mm |
Mold open width | 230mm | Die head heating power | 3kw |
Mold size | 325x350≥80 | Platen? side | 460x500x50 |
Thickness of mold | 160-320 | Air blowing way | Blowing up on bottle |
Air consumption | 0.5-0.8m3/min | Raw material | PE/PP |
Cropping type | Hot cutting | Clamping force | 50KN |
Speed adjust type | Frequency control | Operating system | PLC |
Machine dimensions | 4800x3600x3200 | ? | ? |
- - - -
?
?
?
?
Major component??
?
- - - -
number | name | Place of origin |
1 | Control computer | Germany Siemens |
2 | PLC display | Japan Omron |
3 | Frequency control | Zhejiang Defu |
4 | contactor | Germany Siemens |
5 | Hydraulic parts | Japan YUKEN |
6 | Oil hydraulic pump | Taiwan HYTAC |
7 | Pneumatic parts | Germany Rexroth |
8 | Extrusion motor | Tianjin |
9 | reducer | Zibo? Guotai |
10 | Electric parts | Germany Siemens |
- - - -
? ??
?
Read More
Dongguang County Bai tong Plastic Products Co.,Ltd.
Automatic Blow Molding Machine,Bottle Blow Molding Machine,Extrusion Blow Molding Machine
Address: South of the city industrial park,DongGuang city , HeBei province,
Cangzhou, Hebei
China, 061000
Tel: 86-0317-7696987
Fax: 86-0317-7696987
